LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2012 >> Yukon Base, RWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Interior Paneling >> Repair Instructions >> Center Pillar Lower Garnish Molding Replacement

Center Pillar Lower Garnish Molding Replacement

Fig 1: View Of Center Pillar Lower Garnish Molding Assembly & Retainers
GM1657847Courtesy of GENERAL MOTORS COMPANY
Center Pillar Lower Garnish Molding Replacement

Callout Component Name

Preliminary Procedures

  1. Remove front door sill plate. Refer to Front Side Door Sill Trim Plate Replacement .
  2. Remove rear door sill plate. Refer to Rear Side Door Sill Trim Plate Replacement (Extended Wheelbase) , Rear Side Door Sill Trim Plate Replacement (Standard Wheelbase) .
1 Center Pillar Lower Garnish Molding Assembly
  • Ensure seat belt webbing does not become trapped during installation.
  • Tab to be fully seated and installed prior to retainer.
2 Center Pillar Lower Garnish Molding Retainer (Qty: 2)