LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2012 >> Yukon Base, RWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System And Release Systems >> Repair Instructions >> Opening the Liftgate Without Electrical Power

Opening the Liftgate Without Electrical Power

Fig 1: View Of Liftgate & Trim Panel Plug
GM1736709Courtesy of GENERAL MOTORS COMPANY
Opening the Liftgate Without Electrical Power

Callout Component Name
1 Liftgate
2 Liftgate Trim Panel Plug

Procedure

  1. Locate dimple on trim panel.
  2. Use a 1 1/16 inch hole saw to drill a hole through the trim panel.
  3. Using a flat-bladed tool push down on the black bellcrank lever, through the access hole, to unlock the liftgate.
  4. Push open the liftgate from the inside.
  5. Install a new hole plug.
scientia non olet · About LEMON Manuals