Evaporative Emission Line Replacement - Canister to Tank

Evaporative Emission Line Replacement - Canister to Tank

Removal Procedure
Warning: Refer to Fuel and Evaporative Emission Pipe Warning Technician Safety Information.

Warning: Refer to Gasoline/Gasoline Vapors Warning Service Precautions.


Caution: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.




2. Refer to Plastic Collar Quick Connect Fitting Service Procedures in order to disconnect the evaporative emission (EVAP) hoses (1, 3) from the following:

* The EVAP canister (5)
* The vent valve

3. Disengage the EVAP hose (3) from the retaining clip on the fuel tank.

Installation Procedure




1. Secure the EVAP hose (3) to the retaining clip on the fuel tank.
2. Refer to Plastic Collar Quick Connect Fitting Service Procedures in order to connect the EVAP hoses (1, 3) to the following:

* The EVAP canister (5)
* The vent valve

3. Lower the vehicle.