Rear Door Weatherstrip Replacement

Rear Door Weatherstrip Replacement

Tools Required

J 38778 Door Trim Pad Clip Remover or Equivalent

Removal Procedure




1. Open the rear door.
2. Remove the weatherstrip from around the door by inserting J 38778 , or equivalent, under the weatherstrip and releasing the integral retainers (2) from the door frame.
3. Remove the weatherstrip from the rear door.

Installation Procedure




1. Position the weatherstrip to the rear door.
2. Install the weatherstrip around the rear door frame using the integral retainers (2).
3. Close the rear door.