Tie Down Hook / Bracket: Service and Repair

Pickup Box Tie Down Loop Replacement


Removal Procedure

Warning:Refer to Approved Equipment for Collision Repair Warning .





1.Locate and drill out the spot welds.

2.Remove the tie down loop.

Installation Procedure

1.Prepare all mating surfaces as necessary.

2.Apply GM-approved Weld-Thru coating or equivalent to all mating surfaces. Refer to Anti-Corrosion Treatment and Repair .





3.Position the tie down loop.

4.Plug weld accordingly.

5.Clean and prepare all welded surfaces.

6.Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair .

7.Paint and repair the area. Refer to Basecoat/Clearcoat Paint Systems .