Front Seat Center Latch Side Belt Replacement

Front Seat Center Latch Side Belt Replacement

Removal Procedure




1. Remove the rear inboard seat bolt (1) from the passenger seat.
2. Remove the grommet securing the center seat belt assembly (2) to the seat adjuster.
3. Remove the center seat belt assembly.

Installation Procedure




1. Position the center seat belt assembly (2) over the rear inboard seat adjuster mounting hole.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the front seat mounting bolt (1).

Tighten the front seat mounting bolt to 52.5 Nm (39 lb ft).