Front Seat Back Recliner Outer Trim Panel Replacement

Fig 1: Identifying Front Seat Back Recliner Outer Trim Panel

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Front Seat Belt Anchor Finish Cover
2	Front Seat Adjuster Switch Mounting Plate Procedure Using a non-metallic flat-bladed tool, release the retainer tabs starting at the rear edge and working forward while pulling outward on the mounting plate. Disconnect the electrical connectors from the switch assemblies.
3	Front Seat Outer Recliner Finish Cover Screw (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
4	Front Seat Outer Recliner Finish Cover