LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Yukon Base, 5.3 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Electrical - Hybrid) >> Repair Instructions >> Generator Control Module Ground Strap Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Drive Motor Generator Control Module Ground Strap And Bolt
    GM1968778Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner assembly. Refer to Upper Intake Manifold Cover Replacement .
  2. Remove the drive motor generator control module ground strap bolt (1) and strap (2).
scientia non olet · About LEMON Manuals