2-3-4 Clutch Disassemble

WARNING: This page is about a different variant/trim than selected.

Fig 1: 2-3-4 Clutch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Hybrid Direct, 2-3-4 Clutch Piston Ring Use DT 47867 and press to remove the 2-3-4 piston and spring. Discard the retaining ring. It is not reusable. Special Tool DT 47867 Adjustable Clutch Spring Compressor
2	Hybrid Direct, 2-3-4 Clutch Piston Dam
3	Hybrid Direct, 2-3-4 Clutch Piston Return Spring TIP: Use DT 47867 and press to remove the 2-3-4 piston and spring.
4	Hybrid Direct, 2-3-4 Clutch Piston Outer Seal
5	Hybrid Direct, 2-3-4 Clutch Piston
6	Hybrid Direct, 2-3-4 Clutch Piston Inner Seal