4th Clutch Piston Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: 4th Clutch Piston

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	4th Clutch Piston TIP: Use a 2 inch spacer between DT-48056 and DT-47694 . Special Tools DT-47694 Piston Spring Compressor DT-48056 Spring Compressor Bridge
2	4th Clutch Piston Retaining Spring Assembly
3	4th Clutch Piston Retaining Ring TIP: Do not reuse the retaining ring.
4	4th Clutch Waved Plate
5	4th Clutch Plate TIP: Alternate between steel and fiber clutch plates.
6	4th Clutch Plate Assembly TIP: Alternate between steel and fiber clutch plates.
7	4th Clutch Backing Plate
8	4th Clutch Piston Retaining Ring TIP: Do not reuse the retaining ring.