LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Yukon Base, 5.3 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Engine Mechanical - Hybrid (LZ1) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Crankshaft Rear Oil Seal Housing Removal

Crankshaft Rear Oil Seal Housing Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Rear Housing, Gasket And Seal
    GM1552544Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear oil seal housing bolts (517).
  2. Remove the housing (518) and gasket (519).
  3. Remove the rear oil seal (141).
scientia non olet · About LEMON Manuals