LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Yukon Base, 5.3 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Mechanical - Hybrid (LZ1) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Crankshaft Front Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Crankshaft Front Oil Seal
    GM1658279Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
  2. Remove the crankshaft front oil seal (140) from the front cover.
scientia non olet · About LEMON Manuals