LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Yukon Base, 5.3 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Transfer Case - BW 4485-Nr3) >> Repair Instructions - On Vehicle >> Transfer Case Rear Extension Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the rear output shaft seal. Refer to Rear Output Shaft Seal Replacement .
    2. Fig 1: Rear Output Shaft Bushing
    GM1549519Courtesy of GENERAL MOTORS CORP.
  2. Using J 45380 , remove the rear output shaft bushing.
scientia non olet · About LEMON Manuals