LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Yukon Base, 5.3 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Controls And Fuel - Hybrid (LZ1) - DTC P0010 Through DTC P0341) >> Diagnostic Information and Procedures >> DTC P0102 or P0103 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0102 

The ECM detects the MAF Sensor signal is less than 1, 126 Hz or 0.5 g/s for greater than 5 s.

P0103 

The ECM detects the MAF Sensor signal is greater than 14, 500 Hz or 1, 065 g/s for greater than 5 s.

scientia non olet · About LEMON Manuals