LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Yukon Base, 5.3 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transmission - 2ML70 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Stuck in First or Reverse Gear

Stuck in First or Reverse Gear

WARNING: This page is about a different variant/trim than selected.
Stuck in First or Reverse Gear

Checks Causes
Hybrid Low 1-2 Clutch Assembly
  • Inspect for damaged or worn 1-2 clutch plates.
  • Inspect for damaged 1-2 clutch backing plate. Inspect for worn splines on backing plate.
  • Inspect for damaged 1-2 clutch backing plate retaining ring.
  • Inspect for damaged 1-2 clutch piston assembly, spring, spring retaining ring, and center support assembly.
scientia non olet · About LEMON Manuals