LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Yukon Base, 5.3 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transmission - 2ML70 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> No Reverse Gear

No Reverse Gear

WARNING: This page is about a different variant/trim than selected.
No Reverse Gear

Checks Causes
Drive Motor with Generator - Position 2 Motor Failure
  • Inspect 3 phase cables.
  • Inspect connections at motor.
  • Inspect motor end bearings.
NOTE:

Should have DTC present.

Control Valve Upper Body Assembly Inspect for worn, damaged, or sticking regulator valve and valve spring.
Control Valve Lower Body Assembly Inspect for worn, damaged, or sticking clutch select solenoid valve 3 and valve spring.