Harsh, Soft, Delayed, or Slipping Reverse Gear
WARNING: This page is about a different variant/trim than selected.
Harsh, Soft, Delayed, or Slipping Reverse Gear
| Checks |
Causes |
| Hybrid Low 1-2 Clutch Assembly |
- Inspect for damaged or worn 1-2 clutch plates.
- Inspect for damaged 1-2 clutch piston, apply ring, and spring.
- Inspect for cut, worn, or damaged 1-2 clutch piston dam O-ring seal, inner seal, and outer seal.
- Inspect for improper 1-2 clutch backing plate retaining ring.
- Inspect for damaged 1-2 clutch backing plate
- Inspect for worn splines on the backing plate.
|