LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Yukon Base, 5.3 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transmission - 2ML70 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P1824, P182A-P182F, P1838, or P1839 >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different variant/trim than selected.

The transmission internal mode switch connects electrically to the control solenoid valve assembly and is serviced separately from the control solenoid valve assembly. Inspect the transmission internal mode switch, harness, connector, and control solenoid valve assembly pins for metallic debris. Use a terminal test kit for any test that requires probing the control solenoid valve assembly harness connector or a component harness connector. The transmission internal mode switch assembly can be damaged by currents exceeding 2 mA. Test the transmission internal mode switch assembly for an open condition whenever a short to voltage condition is observed.

scientia non olet · About LEMON Manuals