Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
Transmission Internal Mode Switch Logic
| Gear Selector Position | Signal A | Signal B | Signal C | Signal P |
|---|---|---|---|---|
| Park (P) | LOW | HI | HI | LOW |
| Reverse (R) | LOW | LOW | HI | HI |
| Neutral (N) | HI | LOW | HI | LOW |
| Drive (D) | HI | LOW | LOW | HI |
| Manual (M) | HI | HI | LOW | LOW |
Test for the correct operation of the S2 transmission manual shift switch. Refer to Transmission Internal Mode Switch Logic .
- If the S2 transmission manual shift switch operation matches the S2 transmission manual shift switch logic table, the system if functioning normally.