LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Yukon Base, 5.3 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transmission - 2ML70 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P16F8 >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different variant/trim than selected.

When attempting to set transmission control module internal DTCs, run the engine for at least 1 minute, and then shut the engine OFF for 30 seconds. Following this procedure will allow for a complete transmission control module shutdown. Program the transmission control module with the latest software version and retest the DTC to see if the DTC resets.