Conditions for Running the DTC

P0796 or P0797

• The engine run time is greater than 1 second.
• Shift solenoid valve 1 is not in a transition state.
• The transmission line pressure is greater than 370 kPa (54 psi) and not fluctuating by greater than 30 kPa (4 psi).
• Propulsion is active.

P0796 

The clutch pressure control solenoid 3 commanded pressure is greater than 1800 kPa (261 psi) for 4.5 seconds.

P0797 

The clutch pressure control solenoid 3 commanded pressure is less than 5 kPa (1 psi) for 4.5 seconds.