LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Yukon Base, 5.3 3 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transmission - 2ML70 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P0796 or P0797 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

The clutch pressure control solenoid 3 is part of the control solenoid valve assembly and is not serviced separately. The transmission control module (TCM) supplies 12 V to the clutch pressure control solenoid 3 on the high side driver 1 circuit. The TCM controls the clutch pressure control solenoid 3 through the clutch pressure control solenoid 3 control circuit. The normally high clutch pressure control solenoid 3 controls fluid to hybrid low, 1-2 valve and the hybrid low, 1-2 clutch boost valve when commanded ON and exhausts fluid when commanded OFF.

scientia non olet · About LEMON Manuals