Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0721
The transmission control module detects an invalid Automatic Transmission Output Shaft Speed Sensor direction for 2.5 seconds.
P0722
- The transmission control module detects no signal from the Automatic Transmission Output Shaft Speed Sensor.
- The transmission output speed is less than 50 RPM for 1.5 seconds.
P0723
- The transmission control module detects an unrealistic signal drop from the Automatic Transmission Output Shaft Speed Sensor.
- Automatic Transmission Output Shaft Speed Sensor DTC P0723 has not failed this ignition.
- The transmission output speed is 1, 000 RPM or greater for 6 seconds.
- The transmission output speed drops 1, 000 RPM for greater than 6 seconds and does not recover.