Conditions for Setting the DTC

P0711

• The difference between the TCM temperature and Trans. Fluid Temp. is greater than 15-50°C (59-122°F), depending on the highest of the Trans. Fluid Temp., TCM temperature and TCM power up temperatures.
• The difference between the TCM power up temperature and TCM substrate temperature is greater than 15-50°C (59-122°F), depending on the highest of the Trans. Fluid Temp., TCM temperature and TCM power up temperatures.
• The above conditions have to be met for 5 minutes.

P0712 

The Trans. Fluid Temp. parameter is less than -60°C for greater than 60 seconds.

P0713 

The Trans. Fluid Temp. parameter is greater than 160°C for less than or equal to -60°C (-76°F) for greater than 60 seconds.