LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Yukon Base, 5.3 3 >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Riser Finish Cover Replacement (Tahoe/Yukon/Escalade w/Bucket)

Rear Seat Riser Finish Cover Replacement (Tahoe/Yukon/Escalade w/Bucket)

Fig 1: Rear Seat Riser Finish Covers (Tahoe/Yukon/Escalade w/Bucket)
GM1684826Courtesy of GENERAL MOTORS CORP.
Rear Seat Riser Finish Cover Replacement (Tahoe/Yukon/Escalade w/Bucket)

Callout Component Name

Preliminary Procedures

  1. Flip and fold the rear seat forward.
  2. Remove the rear seat floor filler trim cover.
1 Rear Seat Riser Finish Cover Screw
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
2 Rear Seat Riser Finish Cover
3 Rear Seat Riser Finish Cover
scientia non olet · About LEMON Manuals