LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Yukon Base, 5.3 3 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front End Upper Tie Bar Replacement

Front End Upper Tie Bar Replacement

Fig 1: Front End Upper Tie Bar
GM1772599Courtesy of GENERAL MOTORS CORP.
Front End Upper Tie Bar Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the radiator grille reinforcement support. Refer to Radiator Grille Reinforcement Support Replacement .
  2. Remove the radiator support diagonal brace. Refer to Radiator Support Diagonal Brace Replacement .
  3. Remove the upper fan shroud bolts. Refer to Cooling Fan and Shroud Replacement (Non-HP2) , Cooling Fan and Shroud Replacement (HP2) .
  4. Remove the upper radiator bolts. Refer to Radiator Replacement (Non HP2) , Radiator Replacement (HP2) .
  5. Remove the upper condenser bolts. Refer to Air Conditioning Condenser Replacement (Gas) .
1 Upper Tie Bar Bolt (Qty: 6)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Upper Tie Bar Brace Bolt (Qty: 2)
Tighten 
9 N.m (80 lb in)
3 Upper Tie Bar
scientia non olet · About LEMON Manuals