Drive Belt Tensioner: Service and Repair

Drive Belt Tensioner Replacement (LE5)

Removal Procedure




1. Remove the drive belt. Refer to Drive Belt Replacement (Service and Repair).
2. Remove the drive belt tensioner bolt.
3. Remove the drive belt tensioner.

Installation Procedure




1. Position the drive belt tensioner.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the drive belt tensioner bolt and tighten to 45 Nm (33 lb ft).
3. Install the drive belt. Refer to Drive Belt Replacement (Service and Repair).