Torsion Bar Anchor Replacement

Torsion Bar Anchor Replacement

Removal Procedure

1. Remove the torsion bar. Refer to Front Torsion Bar Replacement (Front Torsion Bar Replacement).




2. Remove the nuts and the bolts from the lower control arm.




3. Remove the torsion bar anchor.

Installation Procedure




1. Install the torsion bar anchor.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the nuts and the bolts to the lower control arm and tighten to 80 Nm (59 lb ft).
3. Install the torsion bar. Refer to Front Torsion Bar Replacement (Front Torsion Bar Replacement).