Ignition Lock Cylinder Opening Trim Cover Replacement

Fig 1: Identifying Ignition Lock Cylinder Opening Trim Cover

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the steering column lower trim cover bolts. Refer to Steering Column Lower Trim Cover Replacement .
1	Ignition Lock Cylinder Opening Trim Cover Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Ignition Lock Cylinder Opening Trim Cover Procedure Unclip the ignition lock cylinder opening trim cover from steering column lower trim cover. Separate the ignition lock cylinder opening trim cover from the steering column upper trim cover.

Callout

Component Name

Preliminary Procedure
Remove the steering column lower trim cover bolts. Refer to Steering Column Lower Trim Cover Replacement .

Ignition Lock Cylinder Opening Trim Cover Bolt (Qty: 2)

CAUTION:

Tighten
2 N.m (18 lb in)

Ignition Lock Cylinder Opening Trim Cover

Procedure

Unclip the ignition lock cylinder opening trim cover from steering column lower trim cover.
Separate the ignition lock cylinder opening trim cover from the steering column upper trim cover.