Rear Seat Recliner Outer Finish Cover Replacement - Inboard (with 40 Percent Seat)

Fig 1: View Of Rear Seat Recliner Outer Finish Cover - Inboard (With 40 Percent Seat)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rear Seat Recliner Outer Finish Cover Procedure Move the seat forward to the Smart Slide® E-Z entry position. Remove the rear seat recliner outer finish cover by pulling outward to disengage the retainers. When reinstalling the cover, ensure that the inboard recliner cable is above the push-in retainer.
2	Push-in Retainer
3	Retainer Clip (Qty: 2)

Callout

Component Name

Rear Seat Recliner Outer Finish Cover

Procedure

Move the seat forward to the Smart Slide® E-Z entry position.
Remove the rear seat recliner outer finish cover by pulling outward to disengage the retainers.
When reinstalling the cover, ensure that the inboard recliner cable is above the push-in retainer.

Push-in Retainer

Retainer Clip (Qty: 2)