Rocker Panel Extension Molding Replacement
Rocker Panel Extension Molding Replacement
| Callout | Component Name |
|---|---|
| 1 | Rocker Panel Extension Molding Screw (Qty: 4)
CAUTION:
Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in) |
| 2 | Rocker Panel Extension Molding Bolt Tighten 5.0 N.m (44 lb in) |
| 3 | Rocker Panel Extension Molding Assembly TIP: Position the top edge of the molding under the front bottom edge of the rear wheelhouse panel prior to installing the screws. |