X160 Engine Harness to Fuel Injector Bank 2 Harness
Connector Part Information
- Harness Type: Engine
- OEM Connector: 33472-0606
- Service Connector: 19178087
- Description: 6-Way F MX150 Series, Sealed (BK)
|
Connector Part Information
- Harness Type: Fuel Injector
- OEM Connector: 33482-0601
- Service Connector: Pending
- Description: 6-Way M MX150 Series, Sealed (BK)
|
Terminal Part Information
- Terminated Lead: 13575738
- Release Tool: J-38125-217
- Diagnostic Test Probe: J-35616-14 (GN)
- Terminal/Tray: 33012-3001/30
- Core/Insulation Crimp: 2/4
|
Terminal Part Information
- Terminated Lead: Service by Connector Assembly - 33482-0601
- Release Tool: Not Available
- Diagnostic Test Probe: Not Available
- Terminal/Tray: Not Available
- Core/Insulation Crimp: Not Available
|
X160 Engine Harness to Fuel Injector Bank 2 Harness
| Pin |
Wire |
Circuit |
Function |
Pin |
Wire |
Circuit |
Function |
| 1 |
1 D-BU |
4802 |
Direct Fuel Injector (DFI) High Voltage Control Cylinder 2 |
1 |
1 TN |
4802 |
Direct Fuel Injector (DFI) High Voltage Control Cylinder 2 |
| 2 |
1 D-BU/WH |
4902 |
Direct Fuel Injector (DFI) High Voltage Cylinder 2 |
2 |
1 BK |
4902 |
Direct Fuel Injector (DFI) High Voltage Cylinder 2 |
| 3 |
1 L-BU |
4804 |
Direct Fuel Injector (DFI) High Voltage Control Cylinder 4 |
3 |
1 TN |
4804 |
Direct Fuel Injector (DFI) High Voltage Control Cylinder 4 |
| 4 |
1 L-BU/WH |
4904 |
Direct Fuel Injector (DFI) High Voltage Cylinder 4 |
4 |
1 BK |
4904 |
Direct Fuel Injector (DFI) High Voltage Cylinder 4 |
| 5 |
1 PU |
4806 |
Direct Fuel Injector (DFI) High Voltage Control Cylinder 6 |
5 |
1 TN |
4806 |
Direct Fuel Injector (DFI) High Voltage Control Cylinder 6 |
| 6 |
1 PU/WH |
4906 |
Direct Fuel Injector (DFI) High Voltage Cylinder 6 |
6 |
1 BK |
4906 |
Direct Fuel Injector (DFI) High Voltage Cylinder 6 |