Tail Lamp Replacement (Acadia)
Tail Lamp Replacement (Acadia)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Open the lift gate in order to access the tail lamp access hole covers. |
|
| 1 | Tail Lamp Access Hole Cover (Qty: 2) TIP: Use a small flat bladed tool in order to remove the covers. |
| 2 | Tail Lamp Screw (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 3 N.m (27 lb in) |
| 3 | Tail Lamp Assembly TIP: Disconnect the electrical connector prior to removing the tail lamp from the rear body panel. |
| 4 | Tail Lamp Filler Panel Nut TIP: Inspect the nuts, replace if damaged. |