LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia SL, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Diagnostic Information and Procedures >> DTC C0297 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the X2 harness connector at the ECM.
  2. Connect a test lamp between the ECM signal circuit terminal 52 and ground.
  3. Ignition ON, press and release the brake pedal. The test lamp should turn ON and OFF when changing between the selected states.
    • If the test lamp is always OFF, test the signal circuit for a short to ground or an open/high resistance. If the circuit test normal, replace the TCM.
  4. If all circuit tests normal, replace the BCM.
scientia non olet · About LEMON Manuals