Rocker Panel Rear Molding Replacement (Acadia)
Rocker Panel Rear Molding Replacement (Acadia)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Open the rear door in order to remove the rocker panel rear molding. |
|
| 1 | Rear Rocker Panel Finish Panel Screw (Qty: 3)
CAUTION:
Refer to Fastener Caution . Tighten 1.5 N.m (13 lb in) |
| 2 | Rocker Panel Molding Retainers (Qty: 2) |
| 3 | Rocker Panel Rear Molding Assembly Procedure Release the 2 retainers from the back side of the molding and remove. |