Front and Rear Side Door Opening Frame Reveal Molding Replacement

Fig 1: View Of Front & Rear Side Door Opening Frame Reveal Molding (Enclave)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Open the front and rear door on the side the door opening frame reveal molding will be replaced.
1	Front and Rear Side Door Opening Frame Reveal Molding Integral Clip (Qty: 12)
2	Front and Rear Side Door Opening Frame Reveal Molding Procedure Remove the front fender upper rear molding. Refer to Front Fender Upper Rear Molding Replacement (Enclave) . Carefully release the front frame reveal molding from the butt joint located at the quarter panel bezel joint tie plate. Upon installation, secure the butt joint ends firmly together prior aligning the molding retainer clips to the body panel. Secure the front fender upper rear molding. Refer to Front Fender Upper Rear Molding Replacement (Enclave) .

Callout

Component Name

Preliminary Procedure
Open the front and rear door on the side the door opening frame reveal molding will be replaced.

Front and Rear Side Door Opening Frame Reveal Molding Integral Clip (Qty: 12)

Front and Rear Side Door Opening Frame Reveal Molding

Procedure

Remove the front fender upper rear molding. Refer to Front Fender Upper Rear Molding Replacement (Enclave) .
Carefully release the front frame reveal molding from the butt joint located at the quarter panel bezel joint tie plate.
Upon installation, secure the butt joint ends firmly together prior aligning the molding retainer clips to the body panel.
Secure the front fender upper rear molding. Refer to Front Fender Upper Rear Molding Replacement (Enclave) .