Front Side Door Emblem/Nameplate Replacement (TRAVERSE)

Fig 1: View Of Front Side Door Emblem/Nameplate (TRAVERSE)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Side Door Nameplate Assembly (TRAVERSE) Procedure When removing protective liners from adhesive backed nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion. Use a J 25070 heat gun or equivalent and a small flat-bladed tool in order to remove the old letter nameplate. Clean all the adhesive residue from the door bodyside molding, wipe the surface dry with a clean lint-free towel prior to installing the new TRAVERSE letter nameplate. Close the front door. Press the nameplate firmly to the front door molding to ensure full adhesion to the body side molding is made.

Callout

Component Name

Front Side Door Nameplate Assembly (TRAVERSE)

Procedure

When removing protective liners from adhesive backed nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
Use a J 25070 heat gun or equivalent and a small flat-bladed tool in order to remove the old letter nameplate.
Clean all the adhesive residue from the door bodyside molding, wipe the surface dry with a clean lint-free towel prior to installing the new TRAVERSE letter nameplate.
Close the front door.
Press the nameplate firmly to the front door molding to ensure full adhesion to the body side molding is made.