LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - On Vehicle (2 Of 2)) >> Oil Pan Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Drain the engine oil and remove the oil filter. Refer to Engine Oil and Oil Filter Replacement (LF1)  or Engine Oil and Oil Filter Replacement (LAU) .
  3. Remove the catalytic converter. Refer to Catalytic Converter Replacement - Left Side (LF1) .
  4. Remove the air conditioning (A/C) compressor bolts and reposition. Refer to Air Conditioning Compressor Replacement (LF1) or Air Conditioning Compressor Replacement (LAU) .
  5. Remove the front cover. Refer to Engine Front Cover Replacement .
  6. Remove the oil pan to transmission bolts.
    7. Fig 1: Locating Oil Pan & Bolts
    GM1831994Courtesy of GENERAL MOTORS CORP.
  7. Remove the oil pan bolts.
  8. Remove the oil pan.
  9. Clean the oil pan and the engine block gasket surface. Refer to Oil Pan Cleaning and Inspection .
scientia non olet · About LEMON Manuals