Engine Oil Cooler Replacement

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Engine Oil Cooler

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the engine oil cooler shield. Refer to Engine Oil Cooler Shield Replacement .
1	Engine Oil Cooler Fastener (Qty: 6) CAUTION: Refer to Fastener Caution . Tighten: 12 N.m (106 lb in)
2	Engine Oil Cooler Procedure Discard the gasket. Do NOT reuse. Transfer components as necessary.

Callout

Component Name

Preliminary Procedure:
Remove the engine oil cooler shield. Refer to Engine Oil Cooler Shield Replacement .

Engine Oil Cooler Fastener (Qty: 6)

CAUTION: Refer to Fastener Caution .

Tighten: 12 N.m (106 lb in)

Engine Oil Cooler

Procedure

Discard the gasket. Do NOT reuse.
Transfer components as necessary.