LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - On Vehicle (2 Of 2)) >> Crankshaft Rear Oil Seal and Housing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Crankshaft Rear Oil Seal & Housing
    GM902808Courtesy of GENERAL MOTORS CORP.
  1. Install the crankshaft rear oil seal and housing. Refer to Crankshaft Rear Oil Seal and Housing Installation .
  2. Install the oil pan. Refer to Oil Pan Replacement .
  3. Install the engine flywheel. Refer to Engine Flywheel Replacement .