Heated Oxygen Sensor Replacement - Sensor 2 (LAU)
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement . |
|
| 1 | Heated Oxygen Sensor
CAUTION:
Refer to Fastener Caution
. Procedure: Disconnect the electrical connector. Tighten: 42 N.m (31 lb ft) |