LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - Off Vehicle (4 Of 5)) >> Turbocharger Heat Shield Installation

Turbocharger Heat Shield Installation

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Turbocharger Heat Shield Nut & Bolt
    GM2026571Courtesy of GENERAL MOTORS CORP.
  1. Install the 2 turbocharger heat shield spacer (1).
  2. Install the turbocharger heat shield (2).
    3. CAUTION: Refer to Fastener Caution .
  3. Install the 2 turbocharger heat shield bolts (3) and tighten to 10 N.m (89 lb in).
  4. Install the turbocharger heat shield nut (4) and tighten to 50 N.m (37 lb ft).
    5. Fig 2: View Of Turbocharger Heat Shield
    GM2026570Courtesy of GENERAL MOTORS CORP.
  5. Install the catalytic converter bracket (4).
  6. Install the catalytic converter brace bracket nut (3) and tighten to 42 N.m (31 lb ft).
  7. Install the catalytic converter brace bracket bolt (2) and tighten to 42 N.m (31 lb ft).
scientia non olet · About LEMON Manuals