Turbocharger Coolant Feed Pipe Installation

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Turbocharger Oil Feed Pipe, Fittings & Gaskets

Courtesy of GENERAL MOTORS CORP.

Install the turbocharger coolant feed pipe (5).

CAUTION: Refer to Fastener Caution .

Install the turbo charger coolant feed pipe fitting (3) and (4) and tighten the M14 banjo screw to 35 N.m (26 lb ft).
Install the turbo charger coolant feed pipe fitting (1) and (2) and tighten the M12 banjo screw to 30 N.m (22 lb ft).