LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - Off Vehicle (4 Of 5)) >> Exhaust Turbocharger Inlet Pipe Installation - Right Side

Exhaust Turbocharger Inlet Pipe Installation - Right Side

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Turbocharger Exhaust Pipe & Gasket
    GM2026532Courtesy of GENERAL MOTORS CORP.
  1. Install the NEW turbocharger exhaust pipe gasket (1).
  2. Install the exhaust turbocharger inlet pipe bank 1 (2).
    3. CAUTION: Refer to Fastener Caution .
  3. Install the 5 NEW turbocharger exhaust pipe nuts (3) and tighten to 30 N.m (22 lb ft).
    4. Fig 2: Identifying Exhaust Heat Shield & Bolts - Right Side
    GM2026531Courtesy of GENERAL MOTORS CORP.
  4. Install the exhaust heat shield bank 1 (2).
  5. Install the 5 exhaust heat shield bolts (1) and tighten to 10 N.m (89 lb in).
scientia non olet · About LEMON Manuals