LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - Off Vehicle (4 Of 5)) >> Automatic Transmission Flex Plate Installation >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Automatic Transmission Flex Plate & Bolts
    GM2026574Courtesy of GENERAL MOTORS CORP.
  1. Install the automatic transmission flex plate (2).
  2. Loosely install the NEW 8 automatic transmission flex plate bolts (1).
    3. Fig 2: Identifying Special Tool - EN 46106
    GM945978Courtesy of GENERAL MOTORS CORP.
  3. Install the EN 46106:  holder.
    4. Fig 3: View Of Automatic Transmission Flex Plate & Bolts
    GM2026574Courtesy of GENERAL MOTORS CORP.
  4. Tighten the 8 automatic transmission flex plate bolts (1) to 30 N.m (22 lb ft).
  5. Tighten the NEW 8 automatic transmission flex plate bolts an additional 45 degrees using the EN 45059:  kit.
    6. Fig 4: Identifying Special Tool - EN 46106
    GM945978Courtesy of GENERAL MOTORS CORP.
  6. Remove the EN 46106:  holder.
scientia non olet · About LEMON Manuals