Coolant Recovery Reservoir Replacement

Fig 1: View Of Coolant Recovery Reservoir

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Drain the coolant from the recovery reservoir. Remove the front compartment sight shield if necessary. Refer to Front Compartment Sight Shields Replacement (Traverse) , Front Compartment Sight Shields Replacement (Acadia) , Front Compartment Sight Shields Replacement (Enclave)
1	Coolant Recovery Reservoir Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 5 N.m (44 lb in)
2	Coolant Recovery Reservoir Procedure Remove overflow hose from reservoir

Callout

Component Name

Preliminary Procedure

Coolant Recovery Reservoir Bolt (Qty: 2)

CAUTION:

Tighten
5 N.m (44 lb in)

Coolant Recovery Reservoir
Procedure
Remove overflow hose from reservoir