Camshaft Position (CMP) Sensor - Bank 2 Intake
Courtesy of GENERAL MOTORS CORP. Camshaft Position (CMP) Sensor - Bank 2 Intake
| Pin |
Wire |
Circuit |
Function |
| 1 |
0.5 TN |
552 |
Low Reference |
| 2 |
0.5 YE |
5276 |
Camshaft Position Intake Sensor |
| 3 |
0.5 GY |
705 |
5-Volt Reference 2 |
Connector Part Information
- Harness Type: Engine
- OEM Connector: 1928403968
- Service Connector: 88988595
- Description: 3-Way F Kompakt 280 Series, Sealed (BK)
|
Terminal Part Information
- Terminated Lead: Service by Connector Assembly - 88988595
- Release Tool: J-38125-561
- Diagnostic Test Probe: J-35616-35 (VT)
- Terminal/Tray: 1928498056/8
- Core/Insulation Crimp: E/1
|