Instrument Cluster Replacement (Enclave)

Fig 1: Identifying Instrument Cluster (Enclave)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the instrument cluster trim plate applique. Refer to Instrument Panel Cluster Trim Plate Applique Replacement (Enclave) .
1	Instrument Cluster Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Instrument Cluster Assembly Procedure Disconnect the electrical connections. After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse. Refer to Control Module References for programming and setup information.

Callout

Component Name

Preliminary Procedure
Remove the instrument cluster trim plate applique. Refer to Instrument Panel Cluster Trim Plate Applique Replacement (Enclave) .

Instrument Cluster Screw (Qty: 2)

CAUTION:

Tighten
2 N.m (18 lb in)

Instrument Cluster Assembly

Procedure

Disconnect the electrical connections.
After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse.
Refer to Control Module References for programming and setup information.