Liftgate Applique Replacement (Acadia)
Liftgate Applique Replacement (Acadia)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (Traverse) , Liftgate Trim Panel Replacement (Enclave) , Liftgate Trim Panel Replacement (Acadia) . |
|
| 1 | Center Applique Nuts (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 6 N.m (53 lb in) |
| 2 | Center Applique Integral Clips Procedure Install the applique to the liftgate panel first by securing the integral clips. |
| 3 | License Plate Lamp Electrical Connector Procedure Transfer the license plate lamp sockets and electrical harness to the new applique panel. |
| 4 | Liftgate Center Applique |