LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2010 >> Acadia SLT, FWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Radiator Inlet Hose Replacement

Radiator Inlet Hose Replacement

Fig 1: Identifying Radiator Inlet Hose
GM1864276Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Drain the coolant. Refer to Cooling System Draining and Filling (Static Fill)  or Cooling System Draining and Filling (Vac N Fill) 
  2. Remove the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement (Acadia) or Front Compartment Sight Shields Replacement (Enclave) or Front Compartment Sight Shields Replacement (OUTLOOK)
1 Radiator Inlet Hose Clamp (Qty: 2)
Procedure: 
Using J 38185  reposition the radiator inlet hose clamps. See Special Tools .
Special Tools: 
J 38185  Hose Clamp Pliers. See Special Tools .
2 Radiator Inlet Hose
scientia non olet · About LEMON Manuals